{{ doc.eyebrow }}
{{ doc.title }}
{{ doc.status }}
{{ doc.lede }}
{{ docFig.title }}
{{ docFig.sub }}
-
{{ c.status }} {{ c.t }} {{ c.a }}{{ c.b }}
{{ s.h }}
{{ para }}
- {{ b }}
Built for business continuity
Plan to keep working.
Not just to shut down.
Backup is a design choice. Drag the divider to see which work keeps going in each example.
- Appointments and working hoursDelayed service, idle staff and work that may not be recovered.
- Payments, records and stockDisconnected systems or temperature-sensitive inventory needing attention.
- Restart and recoveryReopening the doors can take longer than restoring the power.
We start with what must continue, then review protected loads, reserve, runtime and transfer. Continuity is the design goal, not a universal no-interruption guarantee.
Plan your backup priorities ›One system. Three questions worth asking.
Explore your business case ›Applications
Clinics first.
Built around your work.
Start with dental, medical, veterinary and pharmacy needs. Explore the same planning approach for other businesses.
How it works
Stored energy,
through the day.
Choose a mode. Follow the direction of power, with your backup reserve still in mind.
Monitor and control
Monitor. Control.
Plan ahead.
Energy and compatible lighting, presented in one clear interface. Explore the direction, not a live system.
Current and planned capabilities ›Your backup priorities
What would you want protected?
Choose your site type, tap a few essentials and pick how long they should run.
Your site
Equipment to keep running
{{ g.title }}
From first question to a commissioned system
We ask for technical details only when they matter.
- 01
Share requirements
Use the planner or send a quick request. No electrical knowledge needed.
- 02
Assess the site
We confirm the electrical service, installation location and equipment, by documents or a visit.
- 03
Review the proposal
Configuration, what stays on, transfer arrangement, scope and pricing, with assumptions listed.
- 04
Install and commission
A licensed electrical contractor installs under permit. Tests, settings and documents are recorded at handover.
Continuity first. Value you can examine.
Start with the work.
Then build the business case.
Explore an outage scenario, daily energy charges or an evidence-based carbon assessment. Use only the tools relevant to your project.
Optional scenarios, not a price quote, savings promise or engineering design. No account needed.
Solutions
Battery storage for daily use and backup
A commissioned charge schedule for normal days, a transfer arrangement and protected loads for outages, integrated for your site. Solar optional.
- Protected loads
- Selected circuits, up to the whole building where the site allows
- Split or three-phase
- 120/240 V and 120/208 V, qualified per site
- Scheduled charging
- Commissioned charge and discharge schedule with a reserve
- Licensed install
- Under permit and inspection
What the system includes
One coordinated system.
Storage, power conversion, transfer and controls are specified together for your site. Each role and its equipment are confirmed in the proposal.
Battery storage
Stores energy for scheduled daily use and for backup. Usable energy and the backup reserve are stated in the proposal.
Inverter and charger
Converts stored energy into the power your circuits use, and charges the battery from the grid or optional solar.
Transfer and protection
An automatic or manual transfer switch moves protected circuits during an outage, with protection designed for the site.
Controls and monitoring
Charge schedule and reserve are set at commissioning. Remote monitoring and control are on the platform roadmap.
Coverage
Choose how much stays on
The right level depends on your equipment, your electrical service and how long you need backup.
Essential equipment
Lights, network, computers and refrigeration on selected circuits.
Most of the site
Essentials plus key equipment and some heating or cooling.
The whole building
A design objective, not a default. It needs a load, startup, phase, duration and wiring review before we confirm it.
Site fit
Why your electrical service shapes the design
Two buildings with the same equipment can need different systems. Four things we check before anything is promised.
Target configurations are 120/240 V split-phase and 120/208 V three-phase. Other services, including 347/600 V, are reviewed per site. Optional solar is sized with the storage, where the site and configuration allow.
Send service details for review ›- Voltage and phases
- Single-phase and three-phase sites use different system arrangements. Three-phase applications require review of the supported system arrangement, each phase's loads and the site's electrical service.
- Per-phase limits
- Each phase has its own limit. Where heavy equipment sits on one phase, the review looks at that phase, not only the total.
- Motor starts
- Compressors, suction, pumps and HVAC draw several times their running power for a moment at startup. We collect startup data instead of guessing.
- Transfer arrangement
- An automatic transfer switch (ATS) can move protected loads to stored energy and back without an operator. A manual transfer switch (MTS) needs an authorized person. Your proposal states which applies and what it means for interruption.
{{ mode.label }}
{{ mode.title }}
{{ mode.line }}
Grid{{ mode.gridState }}
EnoPower battery{{ mode.batState }}
Illustrative shares. Actual behaviour follows your configuration and settings.
Specifications
Planning information. Your proposal states the configuration for your site.
- {{ sp.k }}{{ sp.st }}
- {{ sp.v }}
Find the right configuration
Tell us about the site. We review it and prepare a proposal.
Platform
Power first. A considered path to control.
An EnoPower system is configured for each project. Monitoring, permitted-load control and compatible lighting are planned capabilities and are shown separately.
Configured for each project
01Stored energy
Capacity sized for the project.
02Power conversion and transfer
Arrangement confirmed per site.
03Selected equipment
Agreed in your proposal.
Planned capabilities
Monitoring, permitted-load control and compatible lighting
Availability and compatibility require a documented release. Not part of current proposals.
Conceptual system relationship only. Not a wiring diagram or an upgrade guarantee.
Interface concept
Power and lighting.
One considered view.
Battery visibility, reserve settings and compatible lighting scenes belong in a coordinated experience. Explore the controls in this demonstration.
This is an interface preview, not a live dashboard or an app-release announcement. The current project files still classify monitoring and lighting integrations as planned; their release and compatibility need confirmation.
How the layers fit
Select a layer to see what it does and whether it is available today.
{{ layer.statusLabel }}
{{ layer.label }}
{{ layer.line }}
{{ layer.detail }}
On the roadmap
Not available today and not part of current proposals. Future upgrades are not included or guaranteed, and may need hardware changes.
{{ f.label }}
{{ f.statusLabel }}{{ f.line }}
Applications
Choose your site type to see what usually stays on and what we look at more closely.
{{ app.title }}
{{ app.line }}
Common backup priorities
- {{ x }}
Reviewed for your site
- {{ x }}
How it works
How the system runs each day, and how a project moves from first question to handover.
Two jobs, one system
Stored energy for daily use and backup
Select a state to see where power comes from. A concept view, not a wiring diagram.
{{ ex.title }}
{{ ex.body }}
- Grid
- {{ ex.grid }}
- Battery
- {{ ex.bat }}
- Your loads
- {{ ex.loads }}
{{ ex.note }}
{{ ex.linkLabel }}Overnight
The battery charges while electricity is priced lower.
Daytime
The grid supplies the building. The battery holds its charge and reserve.
Higher-priced hours
Stored energy supplies part of the building.
During an outage
Protected loads move onto stored energy through the transfer arrangement in your proposal. An automatic transfer switch (ATS) does this without an operator; a manual transfer switch (MTS) needs an authorized person. A reserve is kept back for this.
The reserve trade-off: energy kept for outages is energy not used on the daily schedule. Settings are agreed at commissioning and can be changed.
Charging
Grid
Stored energy
Illustrative. Hours follow your rate plan and settings agreed at commissioning.
Your project, step by step
Who does what at each stage.
-
{{ p.n }}
{{ p.t }}
{{ p.d }}
{{ p.who }}
What affects backup time
Backup time is not a property of the battery alone. Four quantities decide it together, and your proposal states each one for your configuration.
kW
Protected load
Everything that runs at the same time, plus startup surges from motors.
kWh
Usable energy
Stored energy the system can actually deliver, after conversion losses and depth-of-discharge limits.
%
Reserve
The share held back for outages instead of being used on the daily schedule.
h
Desired hours
How long the protected load should run. Fewer loads or a larger reserve stretch the same energy further.
Roughly, the energy held in reserve divided by the protected load gives the hours. We give a figure for your site only after a technical review.
What should your backup plan cover?
Five questions worth asking of any proposal, ours included, and where EnoPower answers each one.
- 01
Which equipment and circuits are included?
Listed by name in your proposal, from the equipment you selected in the planner and the site assessment.
- 02
How much can run at the same time, including motor starts?
Stated as a continuous rating and a startup allowance, with the startup data we collected for compressors, pumps and HVAC.
- 03
How long can the selected loads run at the planned reserve?
Given as hours for the listed loads at the agreed reserve, with usable energy and losses shown, not a battery size alone.
- 04
What happens during grid loss, equipment failure and restoration?
The transfer arrangement (ATS or MTS), expected interruption, alarms and the return to grid supply are described for your configuration.
- 05
What site review, installation work and commissioning evidence are included?
Scope, exclusions, permit and inspection responsibilities, and the commissioning record you receive at handover.
What helps us prepare a proposal
Site type and location
A postal code is enough to start.
What matters most
Backup, scheduling, peak demand, and what should stay on.
Anything you already have
Bills, equipment lists or drawings. Not sure is fine.
Never open an electrical panel or remove a cover to answer our questions. We collect those details during review.
{{ pl.doneTitle }}
Your reference is {{ pl.ref }}. Use it if you contact us about this project.
- {{ n.n }}{{ n.t }}
- {{ b.k }}
- {{ b.v }}
{{ pl.json }}Energy Planner
{{ pl.modeNote }}
{{ pl.summaryTitle }}
About the project
A few basics so we can route your request.
What should the system do?
Choose everything that applies. Planned features are labelled and are not part of current proposals.
What needs power?
Choose what needs to stay on. Add ratings if you know them; we confirm the rest in review.
Choose familiar equipment. Typical values are used until you add your own.
Backup is not selected, so this step is optional.
Selected: {{ pl.loadCount }}
Essential means it must stay on. Occasional means it runs now and then, not all day.
Essential items are what must stay on. Occasional use counts for a quarter of the time, or less.
{{ it.label }}{{ it.ratingText }}{{ it.tag }}
{{ it.qty }}
Attach your load schedule in the Site step. A specialist reviews it. No figure is calculated here.
Equipment you selected is kept as notes and never added to this total.
About the site
Optional. Share what you know and we confirm the rest during review.
Documents (optional)
Bills, equipment lists, load schedules, drawings or photos of existing conditions. PDF, images, CSV or Excel, up to 10 MB each.
Files upload as soon as you add them, to private storage for this request. Delete takes a file out of this request and asks our server to erase the uploaded copy. The list shows when that is confirmed.
Preview build: files stay on this device and are not uploaded.
Never open a panel or remove a cover for a photo. Do not upload patient information or payment details, and redact account numbers you do not need to share.
-
{{ fl.meta }}
✓ {{ fl.doneText }} Deleting the uploaded copy… {{ fl.error }}
{{ pl.fileNote }}
Check your answers
Edit any section. Your other answers stay as they are.
Indicative requirement
Requirements summary
- {{ t.label }}
- {{ t.v }} {{ t.unit }}
{{ pl.essentialLine }}
- {{ n }}
Draft calculation. Usable capacity, losses, inverter output, startup and phase limits are applied in technical review.
Final sizing is confirmed after a technical review.
{{ sec.title }}
- {{ r.k }}
- {{ r.v }}
What we will check with you
- {{ u }}
How should we reach you?
Only what we need to follow up on this request.
{{ pl.m.name }}
{{ pl.m.company }}
{{ pl.m.email }}
{{ pl.m.phone }}
We use your answers to prepare and follow up on this request. Do not include patient information or payment details. Privacy notice
{{ pl.gateTitle }}
- {{ o }}
You can wait, fix them in the Site step, or send now and share them later. We note what is missing.
{{ pl.failMsg }}
Preview build: sending is simulated. Nothing leaves this page.
For contractors
For electrical contractors
Submit a client project, find technical documents or register partner interest. Each one is separate.
Submit a project
Send load schedules, drawings and service details. You keep the client relationship, and client details are not needed to start.
Start a project ›Technical documents
Checklists and templates for site readiness, electrical data, responsibilities and commissioning.
Browse documents ›Partner interest
Reselling, referral and installation are separate relationships. Terms are discussed individually.
Register interest ›{{ collabFig.title }}
{{ collabFig.sub }}
-
{{ c.status }} {{ c.t }} {{ c.a }}{{ c.b }}
What helps us quote a project
- Service voltage, phase and main breaker rating
- A load schedule, measured demand or an equipment list
- Single-line drawings, if available
- Startup data for motors, compressors and pumps
- Installation location, project reference and timeline
Missing something? Send what you have. Nothing here requires joining a program.
Partners
Register partner interest
We are recording interest in referral, specification or design, electrical installation and resale relationships. They are separate, and no program terms are published yet. To quote a project, submit it directly.
Interest registered
Reference {{ pt.ref }}. We contact you to discuss the relationships you chose. This does not create a partnership or approval.
- {{ r.k }}
- {{ r.v }}
Registration is not open yet
Partner interest is not being recorded on this site at the moment. Use Contact and support, or submit a project directly.
{{ pt.draftNote }}
{{ pt.m.company }}
{{ pt.m.name }}
{{ pt.m.email }}
{{ pt.m.region }}
Installation details are asked only because you chose electrical installation. A person reviews them under the program rules in force. They do not grant approval.
{{ pt.m.jurisdiction }}
Review your interest
Check your answers. Nothing is sent until you choose Register partner interest.
- {{ r.k }}
- {{ r.v }}
{{ pt.m.consent }}
{{ pFailMsg }}
Preview build: sending is simulated. Nothing leaves this page.
Resources
Documents and answers, grouped by who they help.
{{ rs.count }}
{{ g.g }}
No questions match. Try another word, or ask us.
Contact and support
New projects and existing systems are handled separately, so each reaches the right person.
New project or quote ›Use the Energy Planner or send a quick request.
Contractors and partners ›Project submission, documents and partner interest.
Existing system supportChoose Existing system support in the form. Support is handled apart from new quotes.
- {{ r.k }}
{{ r.v }} {{ r.v }}
Phone, email and mailing address are added before this website is released.
Message received
Reference {{ ct.ref }}. {{ ct.doneMsg }}
Send a message
{{ ct.m.name }}
{{ ct.m.email }}
{{ ct.m.message }}
Do not include patient information or payment details. Privacy notice
{{ ct.note }}
{{ cFailMsg }}
Preview build: sending is simulated. Nothing leaves this page.
Ask EnoPower
Search and ask EnoPower
Ask about backup needs, energy use, controls or project documents.
Search is not available on this site yet. Use the menu, or contact the team.
Try a question
{{ mm.text }}
Searching approved pages…
Ask the team to follow up
{{ ho.availability }}
{{ ho.scope }}
Enter an email address like [email protected].
Confirm what is shared before sending.
Preview only. No request was sent and no ticket was created.
Live help is not connected yet. Use Contact and support and include what you need. Nothing from this conversation is sent automatically.
Preview other states
For design review only. The next question shows the chosen state instead of an example answer.
Project accounts
Project accounts are not available yet
Everything on this site works without an account. You can request a quote, submit a contractor project or contact the team directly.
Design preview. Sign-in, email and storage are not connected.
Welcome back
Sign in to your projects
Signing in never requires another trade application. Quotes and public pages stay available without an account.
Sign in
Check your email
If an account exists for {{ ac.email }}, a one-time sign-in link is on its way. Links work once and expire after a short time.
Preview only. No email was sent.
Sign in
This link has expired
Sign-in links work once and expire after a short time. Request a new one for {{ ac.email }}.
Create an account
A place for your project
Create an account
Verify your email
A verification link goes to {{ ac.email }}. The account starts once the email is verified.
Preview only. No email was sent.
Signed in, preview
{{ ac.welcome }}
What would you like to do next?
Start a projectPrepare requirements, files and questions in a project workspace.
{{ ac.inviteNote }}
Your account, company membership, project access and partner status are separate. Signing in does not make you an approved partner, and an email domain never grants access to a company's projects.
Project accounts
The project workspace is not available yet
Everything on this site works without an account. You can request a quote, submit a contractor project or contact the team directly.
Project workspace
Your projects, together
Prepare requirements, share documents and follow a proposal. Public pages and quote requests stay available without an account.
Projects
New projects start in the Energy Planner, so requirements use one data model. In production, the planner record is saved to this workspace as a draft.
Open the Energy Planner ›DraftRevision 1
Example clinic project
Requirements are being prepared. No proposal has been issued.
- Site
- Not entered yet
- Selected loads
- None recorded
- Backup duration
- Not set
- Files
- None
- Open questions
- Service voltage and phase. Installation location.
- Collaborators
- You, owner
Project states
- Draft
- Visible to you and invited collaborators only.
- Submitted
- Sent to EnoPower. Later changes create a new revision.
- Under review
- A person is checking requirements and documents.
- More information needed
- Specific questions are waiting for an answer.
- Proposal ready
- A reviewed proposal is available to authorized members.
- Archived
- Read-only, kept under the retention policy.
Project documents
No private documents in this sample.
Each document shows its version, publication date, applicable configuration, approval status and access level. A replaced document carries a notice that points to its successor.
Browse public documents ›Project messages
No messages yet.
A general Ask EnoPower conversation is never shared with a project automatically. You choose what to attach, and only invited members can read project messages.
Proposals
No proposal has been issued.
Proposals are prepared by people after technical review. Each one shows its revision, issuer and status.
Partner application
Not submitted
Your account and a partner application are separate. You can prepare your own projects while an application is reviewed, and submitting a project never requires partnership.
Register partner interest ›Application states
- Not submitted
- Submitted
- Clarification requested
- Not approved at this time
- Approved for a discussed relationship
{{ wsFig.title }}
{{ wsFig.sub }}
-
{{ c.status }} {{ c.t }} {{ c.a }}{{ c.b }}